0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Plain answers on cartridge-style plasma consumables: how to match the right one to your torch and job, and how to look after it.
There is no single interval that suits every user, because life depends on the current, the thickness cut, the number of pierces and the air quality. Many operators change a cartridge when cut quality drops, before any warning from the machine. Signs include a change in the sound or colour of the arc, a slower cut, subtle changes in torch height, more dross, or a rough edge.Some systems also detect end of life and stop the arc. If your torch allows it, remove the cartridge and look at the nozzle opening: a notched or out-of-round orifice means it should be replaced, as does a damaged shield or cap. Follow the manual for your system.
Plasma cutting gives off fume and gases, and arc processes can produce irritant gases such as nitrogen oxides. Capturing fume at source with local exhaust ventilation is an effective control. If that alone does not control exposure, suitable respiratory protective equipment is needed, and a simple particulate filter will not protect against gases. Your risk assessment decides what is right for the work.Eye protection with filters that meet the relevant British and European standards is essential against arc radiation, and gloves, protective clothing and hearing protection are usually needed too. Change cartridges only in the way your manual describes, such as with the power off or the torch locked, and let a hot torch cool first.
Yes. Moisture, oil and dirt in the compressed air supply are a common reason consumables wear out sooner than expected, and they can also harm cut quality and the torch. Moisture can reach the cutter even when the compressor itself is giving clean air, for example from condensation in long air lines or oil back-feeding from air tools.A dedicated filter at the air inlet helps keep water and particles out, and its element needs replacing as the filter maker or manual says. If cartridge life suddenly drops, check the air supply before blaming the cartridge. The air quality and pressure your system needs are set in its manual.
Plasma consumables are made for a particular current or range, because the nozzle opening and gas flow are sized for that level of power. Running a nozzle at a current well above its rating can damage it and shorten its life, and cut quality suffers. Trade guidance often suggests setting the current close to, but not over, the rating of the nozzle.Match the cartridge to the current you will actually cut at and stay within the range the system manual allows. If you cut at several current levels you may need more than one type of cartridge. The rating shown in the part name, together with the manual, tells you what the part is made for.
