0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Essential consumable kits keep your Powermax up and running with an array of genuine Hypertherm cutting consumables.
Kit Contents
Hypertherm Retaining Cap, for Duramax LT (15 - 30A)
Hypertherm FineCut Deflector, for Duramax LT (15 - 30A)
Hypertherm Shield, for Duramax LT (15 - 30A)
3 x Duramax LT FineCut Nozzles
4 x Duramax LT Standard Nozzles
7 x Duramax LT Electrodes
Hypertherm Swirl Ring, for Duramax LT (15 - 30A)
Straight answers to the questions people ask most when choosing a top-end plasma system for mechanised cutting.
It is used on cutting tables, gantries, bevel heads, pipe cutters and robotic cells that need to cut thick plate quickly and repeatably. The mechanised torch holds a steady height and speed, giving more consistent edges than hand cutting.It suits steel fabricators, heavy engineering and contract cutters. If you only cut a few parts by eye, a hand system may be simpler.
A machine plasma system usually has a control connection for the table or robot controller. It lets the controller start and stop the arc and receive signals such as arc transfer. Many systems can also supply a reduced arc voltage signal for a height controller, and some have a serial or network connection for digital control and status information. Some provide remote on/off.The connections and signals provided differ between makers and models, so check the manual for your machine and confirm that your controller expects the same signals and cables before you buy.
A height controller reads the arc voltage and raises or lowers the torch to keep a constant gap between torch and plate. This keeps cut quality and bevel angle consistent as plate warps, and extends consumable life.It needs a stable voltage signal from the plasma system, so check that your system and controller support each other, and test on scrap plate first.
It should reach the whole travel of the gantry or carriage without being stretched or snagged. A lead that is too short limits movement and wears quickly; a lead that is too long adds clutter.Use a drag chain or support on larger tables, and avoid coils, tight bends and pinch points.
