0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Outer protection plate standard. Pack of 10. Plate marking 42 01 50.
Straight answers to the questions people ask most when choosing and fitting replacement parts for a powered air welding helmet.
The outer protection plate shields the filter lens from spatter and scratches, and the inner plate sits between the lens and your face. They are wear parts whose job is to protect the filter lens.Change them when they are scratched, pitted with spatter or hazy enough to hurt your view. A worn plate makes it harder to see the weld and can be a safety problem.
They remove certain gases and vapours from the air, in addition to the particle filter that deals with fume. Each type is marked for the kind of gas or vapour it handles.You need one if your risk assessment shows gases or vapours that the particle filter alone does not deal with. Pick the type your assessment calls for, and check that it is approved for use with your helmet.
No. A gas filter is made for specific gases or vapours and is marked with the type it handles. An odour pad is generally meant for nuisance smells, so check the manual for your own unit before assuming it gives any protection against harmful gases.Choose any gas filter by your risk assessment, and make sure it is listed for your helmet in the manual. Ask a competent person if you are unsure.
The battery life shortens with use, so replace it when it no longer holds a charge for a working shift. Fit a battery made for your helmet system.The cover protects the battery and its contacts from dirt and knocks. Replace a cracked or loose cover, because dust and spatter can reach the contacts.
