0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
The M-956 is an adhesive foam pad that can be used on any 3M™ Versaflo™ M-Series product. When properly attached to the ratchet on the back of the headband, it can help fit smaller wearers and/or provide additional comfort to any wearer.
Straight answers to the questions people ask most when choosing a powered air headtop with a safety helmet.
It suits work with dust and particles combined with head and face hazards, such as grinding, sanding, cutting, fettling and heavy fabrication. The visor protects the face from flying particles, and the shell protects against knocks, depending on its rating.Not every headtop is suitable for welding. Welding needs protection against the arc, which calls for a proper welding filter, and a headtop without one must not be used for it. Check the data plate, markings and manual for your own headtop to see exactly what it is approved for.
Think about the hazards: dust, grinding particles, impact, sparks, noise and the need for head protection. Then check the helmet and visor ratings, how the headtop connects to the blower, and whether it is approved with your air unit.Also consider comfort, weight, adjustability and whether you need to wear other equipment such as ear defenders. Our team can help you with choosing.
No. Headtops are approved for use with particular blower units, filters and breathing tubes, and the protection rating only applies to approved combinations. The connectors may also differ between generations.Check the maker's compatibility list for your blower. Do not mix parts that are not approved together.
With the right filters fitted and the blower running, it protects against particles in the air, up to the protection factor the maker gives for the approved combination. It does not protect against gases or vapours unless you are using suitable gas filters.The filter you need depends on the hazard, so check your risk assessment and the maker's guidance.
