Rapid Ref : W10430-15

Lincoln LGS3-150G Air Cooled 180A MIG Torch
W10430-15

Name: Lincoln LGS3-150G Air Cooled 180A MIG Torch
SKU: W10430-15

Select Option

Prices From £62.53 ex VAT

Shop Parts

The LGS3 guns range is Lincoln’s valued offer for MIG/MAG applications. With their simple and reliable design offering the best performance, LGS3 guns can meet the challenges of a variety of applications on-site, from maintenance to manufacturing. These models are manufactured in compliance with the most demanding standards, and the high-quality components guarantee efficient welding.

Modern design
Super grip
Unique design of ergonomic handle and lightweight
European standard components
CE compliant
Competitively priced

Brochures & Manuals

BROCHURES & MANUALS

View Brochure

Lincoln MIG Torches FAQs

Answers for buyers replacing or choosing an air-cooled or water-cooled MIG torch for their machine.

How do I tell which parts fit when I replace a worn MIG torch?

Start with the data plate or label on the torch and the manual for your welding machine. Note the rating, the cooling type, the connector at the machine end (Euro-style or a maker-specific fitting), the trigger or control connection, the cable length and the wire sizes it takes.

Then match the consumables to the torch series itself. Contact tips, diffusers, nozzles and liners are generally made for a particular torch family and are not universal, so a part that looks the same may not seat or thread correctly. If you are unsure, our team can help you identify the right part from the markings on your torch.

Can I mix consumables from different torch series?

It is best not to. Shrouds, diffusers, contact tips and liners are usually designed as a set for one torch family, and threads, seat angles and lengths can differ even when parts look alike. A poor fit can overheat the tip, let shielding gas leak and cause feeding trouble.

Buy consumables listed for your exact torch series, and check the markings on the old part before ordering. If the torch has been replaced with a different series, change all the front-end parts together rather than keeping the old ones.

Why am I getting porosity in my welds, and could the torch be the cause?

Yes. Porosity often comes from the gas path, and the torch is a common place to find the fault. Work through it in order: check that the cylinder has gas and that the flow setting is right, look for leaks in the hose and fittings, then inspect the torch.

On the torch, look for dry, cracked or cut O-rings, spatter blocking the nozzle, and a damaged or clogged diffuser. A gas flow tester shows what actually reaches the nozzle. Also shield the weld from draughts, and make sure the metal is clean, as oil, paint, rust or moisture can cause porosity too.

Why does the handle or neck of my torch get so hot?

Heat discolouration on the nozzle, contact tip or neck is a typical sign of overheating. Common causes are a torch rated too low for the job, a loose or wrong-size contact tip, and welding beyond the duty cycle. On water-cooled torches, low or dirty coolant, trapped air or poor flow can also be the cause.

Stop and let the torch cool, then check the tip, the connections and the rating on the data plate. If the same torch keeps overheating, a higher-rated torch is usually the answer, rather than pushing it harder.

See all 6 questions for this category