Multi-process inverter with built-in Synergic and Pulse programs. Auto-Line technology provides link-free primary power operation.
This water-cooled package includes the XMT 350 MPa power source, 4.5 Bernard T-Gun water cooled mig gun, the S-74 MPa wire feeder, a running gear, Coolmate 3 water cooler with 3 x 3.78L Low Conductivity Coolant, a 5m 400A ground cable, a 10m Interconnection cable & a 1.2mm V groove drive roll kit.
Auto-Line™ (Click for Demonstration) - allows for any input voltage hook-up (230 – 460V) with no manual linking required, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.
Adaptive Hot Start™ - increases the output amperage at the start of a weld if necessary, eliminating electrode sticking.
Built-in MIG Pulse Programs - better control over puddle and bead by using the Sharp-Arc settings. The system is working synergically together with the S-74 MPa feeder.
Line Voltage Compensation (Click for Demonstration) - keeps welding output constant even if input power varies by +/-10%. Line voltage compensation further expands to an amazing +37/-59% when operating on 460 VAC.
Fan-On-Demand™ (Click for Demonstration) - power source cooling system operates only when needed, reducing noise, energy use and the number of contaminants pulled through the machine.
Miller Wind Tunnel Technology - internal air flow that protects electrical components and PC boards from dirt, dust, and debris... greatly improving reliability.