Rapid Ref : 528154

Hypertherm Essential Handheld Cartridge Consumables Kit, for Powermax 45/65 SYNC
528154

Name: Hypertherm Essential Handheld Cartridge Consumables Kit, for Powermax 45/65 SYNC
SKU: 528154
Price: 315.00 GBP

Click here to see what's included

£315.00 EX VAT

SSP Suggested Selling Price = £350.00 YOU SAVE £35.00

Buy in 3 easy interest free payments of £105.00^† with

Essential consumable kits keep your Powermax 45/65 SYNC up and running with an array of genuine Hypertherm cutting consumables.

Kit Contents

Part #	Description	Qty
428927	Drag Cutting (45)	1
428931	Drag Cutting (65)	1
428928	FineCut (30-45A)	1
428932	Maximum Removal Gouging (45-85A)	1
428933	Maximum Control Gouging (45-85A)	1
428952	FlushCut (65A)	1
428984	HyAccess Drag Cutting (65A)	1
428987	HyAccess Gouging (65A)	1
528083	Cartridge Reader	1
	Total	9 parts

What's Included

	Hypertherm SmartSYNC Drag Cutting Cartridge (45A)
	Hypertherm SmartSYNC FineCut Hand Cutting Cartridge (30 - 45A)
	Hypertherm SmartSYNC Drag Cutting Cartridge (65A)
	Hypertherm SmartSYNC Maximum Removal Gouging Cartridge (45 - 85A)

	Hypertherm SmartSYNC Maximum Control Gouging Cartridge (45 - 85A)
	Hypertherm SmartSYNC FlushCut Special Cutting Cartridge (65A)
	Hypertherm SmartSYNC HyAccess Drag Cutting Cartridge (65A)
	Hypertherm SmartSYNC HyAccess Gouging Cartridge (65A)
	Hypertherm Cartridge Reader

Hypertherm Consumable Kits FAQs

Straight answers to the questions people ask when choosing and using a plasma torch consumable kit.

What does ohmic sensing mean, and do I need an ohmic kit?

Ohmic sensing is a way for a cutting machine to find the plate: an electrical contact between the torch and the plate tells the height control where the surface is before the arc fires. It is only relevant to mechanised cutting.

If your cutting table's height control uses ohmic sensing, the torch needs the contact ring or cap made for it, connected as the height control manual describes. If it does not, you do not need one. Handheld torches do not use this feature. Check your cutting table's manual first.

How do I make sure a kit fits my plasma torch?

Start with the torch and power source, not just the amperage. Consumables are specific to the cutting current, the material and the application, so confirm that the part numbers match those shown in your torch manual or consumable chart. Look at the data plate and manual for the torch model.

Consumables for one torch family do not normally interchange with another, even when they look alike. If you are unsure, our team can help you match a kit to your torch.

When should I replace the electrode and nozzle?

Replace them when cut quality drops or when inspection shows wear. For many separate-part torches the maker suggests changing a standard copper electrode at the pit depth given in the manual, and a nozzle whose hole is nicked, oval or has rounded edges. Systems differ, so use the figures in your own manual.

On systems that use a single-piece cartridge, replace the whole cartridge when the cut quality is no longer satisfactory or the nozzle hole is no longer round.

Why should the electrode and nozzle be changed together?

They wear together and work as a pair. A new electrode in a worn nozzle, or the reverse, tends to give poor cut quality and can shorten the life of the new part. Makers and trade guides recommend changing the nozzle and electrode as a set.

A kit makes this easy, because it supplies several of each. At the same time, check the swirl ring holes are clear of dirt and lubricant, and look at the shield for a damaged hole or clogged vent holes, and replace what is worn.

See all 6 questions for this category