0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers on choosing, fitting and looking after a lightweight air-cooled MIG torch of this size class and its swan necks.
A lightweight air-cooled torch of this class suits light to medium fabrication, workshop repairs and general steel work, where the welder holds the torch for long periods and a lighter, more flexible lead reduces fatigue. Air cooling means no water cooler or hoses to look after.It is not meant for heavy, continuous welding at high current, where a larger or water-cooled torch is the better fit. Check the rating on the torch against the current and the gas you actually use, and choose a torch with some margin.
On many torches of this type the handle and cable are separate from the neck (the curved tube that carries the contact tip and nozzle), so you can choose the neck shape that suits your work. A neck must be matched to the torch size class and to the maker's neck style, because necks from different styles usually do not interchange.Check the data plate, the manual or the markings on your existing neck and match the size class and the fitting before ordering. If you are unsure, our team can help you choose.
The number in a torch name is a model or size class, not a guaranteed rating, so do not assume it equals the current you can weld at. The real rating depends on the shielding gas, because a torch is usually rated higher on carbon dioxide than on mixed gas, as argon mixes give a hotter arc. It also depends on duty cycle, which is how much of each ten-minute period you can weld without letting the torch cool.Always read the rating for your gas and duty cycle on the torch's data sheet or data plate, and do not simply weld up to the headline number.
The liner must match both the wire material and the wire diameter. Steel liners suit steel wire, while a plastic-type liner (such as PTFE or nylon) is generally used for softer aluminium wire because it creates less friction. Using a liner that is too tight causes jamming and shaving, and one that is too loose lets the wire buckle.A torch should never be run without a liner. Fit the right type and bore size whenever you change wire, and check the torch manual for the correct liner for your cable length.