0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Already have an Adflo respirator? Upgrade your air fed welding helmet with these upgrade kits. Simply attach your current Adflo powered air respirator system and start welding (Depending on the age of your Adflo respirator a hose adapter may be required).
Straight answers to the questions people ask most when upgrading a welding helmet to work with a powered air unit.
An upgrade kit is a helmet, or set of helmet parts, that is built to connect to a powered air respirator unit you already own. It adds the air duct and internal parts so that filtered air from the blower flows into the helmet, turning a standard welding helmet set-up into a powered air one.It is a way of adding respiratory protection to a welding helmet without replacing the whole air system, as long as the parts are compatible with your blower.
Check the make and model of your blower unit against the compatibility information published by the maker of the helmet and the blower. Connectors, fittings and approvals can differ between models and between older and newer generations, so never assume that two parts that look similar will work together.Look for the model number and any date or batch marking on the unit, and compare it with the maker's compatibility list. Some combinations may need an adapter and some may not be approved at all. If you are not sure, our team can help you check before you order.
A powered air system is made up of the helmet, the breathing tube, the blower unit with its filters and battery, a charger and a belt. The kit may include some of these, but you must make sure all the parts needed are present and are compatible.Check that the filters are suited to your work, that the battery is in good condition and that the breathing tube is the right type and in good order. Never use a system with parts missing.
Not necessarily, but check what you have. Filters have a limited life and should be replaced as the maker directs or if they are damaged, clogged or old. A breathing tube that is split, kinked or worn should be replaced, whatever the kit includes.Use only the filters made for your blower and suited to the hazard you work with. Fume and gas hazards need different filters, so check your risk assessment.
The helmet in a kit may come with a filter or without one, depending on the version. If it has no lens, you will need to choose a suitable auto-darkening filter that fits the helmet and suits the welding you do.Think about the processes, the current range and the shade you need. Filters are matched to a helmet's frame, so make sure the one you choose is intended for it.
Some parts, such as plates, sweatbands and covers, are shared across helmet ranges, but many are specific to one design. Do not assume that old parts will fit.Check the part numbers and compatibility lists before reusing or buying. Using parts that do not fit properly can leave gaps that let spatter, light or unfiltered air in.