0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Cover kits, protection plates, neck protectors, batteries and magnifying lenses for a premium auto-darkening welding helmet, and how to choose the right ones.
A front cover kit is the replaceable outer shell part of the helmet: the front panel and the frame that holds the filter in place. Makers describe it as the part to replace when the front cover is worn out or damaged, for instance when it is pitted, scratched or cracked from spatter and knocks.Check the kit is listed for your helmet in the manual, as shapes and fittings differ between helmet types. Fit it as the instructions describe, and do not weld in a helmet with a cracked or loose front.
The outer plate faces the arc and takes most of the spatter. The inner plate sits on the wearer's side and protects the inside of the filter. Both are thin consumables that protect the filter behind them, so they are supplied in packs and are meant to be changed often.Make sure the plate is shaped for your filter and helmet. Some are made as clear or scratch-resistant types, so check the packaging or manual to confirm which fits your setup.
Change a plate when it is pitted, scratched, cracked or too dirty to clean with a soft cloth. Maker manuals for auto-darkening filters say to replace worn, cracked, scratched or pitted cover lenses regularly, and a dirty or damaged one is a common cause of poor vision or a filter that does not darken properly.Check the plates before each shift. If you must strain to see the joint, or the filter flickers, a fresh plate is the quickest first fix.
Yes, as far as you can. The HSE advises using the correct replacement parts and following the manufacturer's replacement schedule for PPE. Parts made for a different helmet may not fit, may leave gaps, or may not match the protection the helmet was tested with.Find the helmet or filter type on its markings and in the manual, then match the part against the manual's parts list. If you are not sure, check before ordering, and do not modify parts to make them fit.
It is a flame-resistant cover that extends protection over the ears, throat and neck, where spatter and arc radiation can reach skin the helmet shell leaves exposed. A welding shield should screen the entire face, ears and portions of the neck from direct arc radiation.It works with your clothing, not instead of it. Clothing still needs to cover all other skin that could be exposed. Check it for burns and thin patches, and replace it if damaged.
No. It adds to your other protective clothing. Clothing must cover all parts of the body that could be exposed to arc radiation, including neck and chest, using heavy-duty, dark, opaque fabric, and man-made fibres which can melt should be avoided.The protector closes a gap around the ears and throat, but your jacket, gloves and collar still matter. Your risk assessment and the maker's instructions decide exactly what you need for the work you do.