SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
4,075,217,631 Fronius iWave 230i DC MV/B TIG Power Source Multi Voltage, 120v & 230v
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 4,075,217,631  

    Fronius iWave 230i DC MV/B TIG Power Source Multi Voltage, 120v & 230v
    4,075,217,631

    £2657.50  EX VAT
     Buy in 3 easy interest free payments of £885.83† with

    Maximum quality – on every weld, with every material. Thanks to targeted heat input and an improved ignition function, the Fronius iWave offers the welder maximum control of the arc and significantly reduces ignition delays. All the operating elements of the iWave series are designed for maximum control as well. The result is intuitive handling, allowing the operator to fully focus on the welding challenge.

    Product Details

    Targeted Heat Input

    Maximum Control Over The Weld Pool

    CycleTIG allows the operator to control the arc, in turn offering the user maximum control overheat input. The short welding times make it easy to keep a safe handle on the weld pool. As a result, the user can weld even the thinnest of materials with ease.

    Intuitive Operation

    Dynamic Graphics-Based Menu Navigation - In Over 30 Languages

    No additional documentation. No wild goose chases. Just follow your instincts. The intuitive menu navigation concept eliminates unnecessary detours during welding, allowing the operator to make the required settings with confidence.

    Reproducible Ignition Processes

    Ignition Delays Reduced By Up To 71%

    Ignition processes that are fast and – perhaps even more importantly – reproducible. Regardless of the material characteristics and without having to adjust any ignition parameters manually. That’s what you get when you opt for RPI auto – intelligent ignition function.

    Industry 4.0 Ready

    Contactless Data Transfer And Authentication

    Ready for Industry 4.0 and anything else that comes its way: from WLAN and Bluetooth right through to NFC, iWave supports all the major connection standards so that the operator can put it to the best possible use.

    Related Items

    iWave 230i MV DC TIG Welder Parts FAQs

    Parts and accessories for a multi-voltage DC inverter TIG welder: torches, cables, trolleys, cases and function options explained.

    How do I find the right part for a DC inverter TIG welder?icon-minus-redicon-plus-red

    Begin with the rating plate and the manual. The plate lists the maker, supply requirements and performance, and the manual shows which torches, cables, trolleys and options are listed for the machine. For a replacement, compare the number or marking on the old part and check connector type, thread and rating, not only the look of the part.

    If the manual is missing, the plate may be all the information you have, so record it before ordering. Our team can help you match a part if you send the plate details.

    Can a DC-only TIG welder weld aluminium?icon-minus-redicon-plus-red

    Generally not well. DC with the electrode negative puts most of the heat into the work but gives little cleaning of the surface, so the oxide skin on aluminium is not broken up. AC is used for aluminium because the electrode-positive part of each cycle helps clear the oxide.

    A DC machine is well suited to steel, stainless steel and similar metals. If you need to weld aluminium regularly, choose an AC/DC machine instead of looking for parts to adapt a DC one.

    What does a torch switch or trigger do, and what are 2T and 4T?icon-minus-redicon-plus-red

    A switch on the torch starts and stops the arc and the gas. In 2T mode you press to start and release to stop. In 4T mode you press and release to start, then press and release again to stop, which is easier on the finger during long welds.

    Upslope and downslope settings raise and lower the current at the start and end of the weld, and a gentle downslope helps fill the crater and reduce cracking. How each mode behaves can differ between welders, so check your welder's manual.

    Do I need a foot pedal or torch remote, and will it fit?icon-minus-redicon-plus-red

    A foot pedal gives fine, continuous control of current while keeping your hands on the torch, which many welders like for precise work. A torch-mounted control is easier in awkward positions, but adjusting it can move the torch slightly. Some welders prefer torch controls on the handle for convenience.

    Before choosing, make sure the plug and control system are listed as compatible with your welder and that the machine is set to accept the remote, as connectors and settings differ.

    See all 6 questions for this category

    Shop Similar Categories