LGS3 360G Mig Torch Parts FAQs
Contact tips, nozzles, diffusers and wire liners for a heavy-duty gas-cooled MIG torch: what wears, how to tell, and how to order the right part.
How do I tell that a contact tip is worn out?
Look at the bore. A tip is worn when the hole is no longer round, for example oval or eroded, or when it shows arcing damage or strong discolouration from overheating. Symptoms include erratic arc, wire burning back to the tip and unsteady feeding.
Spatter or blackening alone is not usually a reason to throw a tip away, and there is no single fixed time interval. Change it when you can see wear or when the arc and feeding tell you something is wrong. Check the tip first before blaming the drive rolls or liner.
Why does the contact tip bore need to match the wire size, and is an aluminium tip different?
The bore must suit the wire diameter. An oversized tip gives poor contact and unsteady current transfer and wears faster, and filing the bore to 'clean it up' makes it uneven. Always match the tip to the wire you are using and keep to the sizes listed in your torch manual.
Tips sold for aluminium usually have a slightly larger bore because aluminium wire expands more when hot and is soft, so it can bind in a tip made for steel. This is general guidance from maker material, so confirm the correct tip for your wire and torch in the manual before ordering.
What is the difference between conical and cylindrical gas nozzles, and which should I choose?
A conical nozzle tapers towards the front, keeps a good view of the joint and is the usual all-round choice. A cylindrical nozzle has a straight, wider bore, is commonly used at higher currents and is generally easier to clean with a reamer, but it can be harder to get into tight corners. Bottle-shaped and tapered nozzles give better access but tighter gas coverage.
Sources differ on which shape gives the widest gas coverage, so do not choose on that alone. Use the largest bore that still lets you reach the joint, because a larger bore helps gas coverage and slows spatter build-up. Make sure the nozzle type, bore and thread suit your torch and tip, and follow the torch manual.
What does the insulating diffuser do, and how do I know it needs changing?
The diffuser holds the contact tip and spreads shielding gas evenly around the wire. On many torches an insulating part separates the live tip holder from the nozzle so that spatter bridging does not carry current to the nozzle.
Signs of trouble include blocked or spattered gas holes, which can cause porosity, a loose fit that overheats, cracked or worn edges, and cut or missing seals. Keep the gas holes clear and make sure the diffuser is tight. If it is damaged, replace it with the type your torch manual specifies instead of trying to repair it.