0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Spares for a powered air welding helmet system: how to pick the right part, what wears, and how to keep the system working as intended.
Change it as the manufacturer instructs, and sooner if it is damaged, visibly contaminated or has become harder to draw air through. For a powered unit that often shows up as a low airflow warning or a shorter battery run time. Do not use a filter that has passed its expiry date.HSE guidance suggests marking the filter with the date it was fitted, so you can add an in-house replacement date. Heavy fume or dust loading can clog a filter quickly, so there is no single safe interval that suits everyone. Your risk assessment and the manual set the routine.
No. A particle filter only removes solid and liquid particles such as welding fume and dust. It does not protect against gases or vapours, and a gas or vapour filter alone does not protect against particles. HSE guidance says never to use a particle-only filter against gas or vapour.If your work may expose you to gases, for example from certain coatings, cleaning solvents or shielding gases in a confined space, the right filter type and whether a powered filter unit is suitable at all should come from your risk assessment and the manufacturer, not from guesswork. Check what the filter markings say it protects against before you order a replacement.
Make an airflow check part of every pre-use check. HSE guidance says to check the fan is giving enough airflow before use, to confirm hoses are connected properly and to make sure battery-powered equipment is fully charged. Most makers describe a specific test, often using a flow indicator or by briefly covering the outlet to trigger the warning, so follow the method in your own manual.If the unit shows low flow, a blocked or loaded filter, a loose hose or a weak battery are the usual places to look. Do not start work until the unit passes.
Treat it as a stop signal. HSE guidance says never to keep working if the fan stops or the airflow rate drops, and to leave the work area immediately. Once you are out of the fume, look for the cause: a clogged or damaged filter, a kinked or disconnected hose, or a flat battery are the usual suspects.Only return to work when the system is giving the airflow the manufacturer specifies. If you cannot find a simple fix, withdraw the unit from use and have it checked by a competent person rather than carrying on with it.
