Furick 2 Series TIG Parts FAQs
Cups, gas lenses, diffusers, O-rings and cup kits for a TIG torch, and how to match and look after them.
How do I identify the right cup, diffuser or gas lens for my TIG torch?
Work out the torch family first, because cups, collet bodies and back caps are normally specific to a torch style and a part for one style may not fit another. Compare your collet body and cup with the maker's parts diagram, check the torch label or manual, and read any part number on the old part.
Then match the size to the tungsten: collets and collet bodies come in sizes that match the electrode diameter. If you cannot match a part by number, send the torch details to the supplier before ordering. Ask the maker or our team if the parts look similar but you are not sure.
How do I choose a cup size?
Cups are sized by the diameter of the opening, usually in sixteenths of an inch, so the bigger the number, the bigger the opening. A larger diameter and a longer cup generally give a longer smooth column of gas and better shielding. A smaller cup suits tight access, but it speeds the gas up and can make the flow more turbulent.
Gas lens cups and standard cups are different designs, so use the type that matches your collet body. Choose the largest cup that still lets you see and reach the joint, and adjust the gas flow to suit rather than just increasing it.
What are the pros and cons of clear glass cups compared with ceramic?
The main benefit of a clear heat-resistant glass cup is that you can see the electrode and the weld pool through it, which helps in corners and tight spots. The drawbacks are that glass is more brittle than ceramic, can cloud with fume deposits and heat, and the visibility benefit matters less with larger cups and longer electrode extensions.
Some welders keep a ceramic cup as a spare for general work. Handle glass with care, avoid dragging or knocking it, and replace any cup that is cracked, chipped or badly clouded. Check that the cup is designed for your collet body or gas lens and torch style.
What does a diffuser do, and how do I know when it needs replacing?
A diffuser spreads the shielding gas evenly as it leaves the torch, so the gas settles around the electrode instead of jetting out unevenly. Like the collet body, it must match the torch style and the tungsten diameter.
Replace a diffuser or gas lens that is blocked, cracked, loose, damaged or heavily contaminated, because poor gas distribution lets air into the weld zone. Signs include dull or discoloured welds, porosity or a tungsten that wears and oxidises quickly. Always remove the electrode and cool the torch before changing parts.