0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Helpful answers on choosing, fitting and looking after the wearable parts of a compressed-air-fed welding helmet system.
Start with the helmet itself. Find the maker's name and the model or type marking on the helmet shell, the filter and the air unit, then check the user manual, which usually has a parts or accessories list. If you still have the old part, look for a part number or code moulded into it and quote that.Filter lenses and safety lenses must also match in size and type, so measure the old one or read its markings rather than guessing. Parts for one helmet range often look similar to another but do not always fit or perform the same. If you are unsure, our team can help you match the part to your equipment.
The user should look the helmet over before every use. HSE welding guidance also says reusable respiratory protective equipment should be examined, maintained and, where appropriate, tested regularly, with a record kept. HSE's welding sheet suggests a thorough examination at least monthly for non-disposable equipment, and its RPE guide says records of examination, testing and repairs should be kept for at least five years.The exact interval and test method depend on the maker's instructions and your risk assessment. A competent person should carry out the work, and worn or damaged parts should be replaced rather than put up with.
Change them when they are worn, soiled or unhygienic. Trade guidance for helmet consumables suggests a sweatband should be replaced at least monthly for someone welding most of the day, and sooner in hot or dirty work. Neck padding follows the same logic, because sweat, dust and grinding dirt build up in the foam or fabric.Sweatbands are quick to change, so most people simply keep spares to hand. Check the manual for how to remove and refit the band without disturbing the headgear, and wash your hands and face before use if you can.
HSE guidance says to inspect respiratory protective equipment thoroughly before each use. For an air-fed helmet that means checking the shell, lenses, headgear and seals for cracks or damage, and checking that every hose and connector is intact and properly connected at both ends. HSE also says to check the air flow every time you use air-fed equipment.If anything looks damaged or the airflow seems low, stop and do not use the equipment until it has been fixed. Tell workers to leave the area if they think the equipment is not working properly.
