0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Premium MIG welding guns. Doubled warranty. Tested, approved & trusted.
Answers for buyers replacing or choosing an air-cooled or water-cooled MIG torch for their machine.
Start with the data plate or label on the torch and the manual for your welding machine. Note the rating, the cooling type, the connector at the machine end (Euro-style or a maker-specific fitting), the trigger or control connection, the cable length and the wire sizes it takes.Then match the consumables to the torch series itself. Contact tips, diffusers, nozzles and liners are generally made for a particular torch family and are not universal, so a part that looks the same may not seat or thread correctly. If you are unsure, our team can help you identify the right part from the markings on your torch.
It is best not to. Shrouds, diffusers, contact tips and liners are usually designed as a set for one torch family, and threads, seat angles and lengths can differ even when parts look alike. A poor fit can overheat the tip, let shielding gas leak and cause feeding trouble.Buy consumables listed for your exact torch series, and check the markings on the old part before ordering. If the torch has been replaced with a different series, change all the front-end parts together rather than keeping the old ones.
The liner should match the wire material and the wire diameter. A wrong-size liner is a very common cause of wire sticking, uneven feeding and bird-nesting, so it is worth checking first when feeding is poor.Steel liners are the usual choice for steel wire, while soft wires such as aluminium are normally fed through a PTFE (plastic) liner so the wire is not scraped. Cut the liner cleanly, remove burrs and fit it so that it sits against the contact tip as the maker's instructions describe. Blow out debris with compressed air when you change it.
Heat discolouration on the nozzle, contact tip or neck is a typical sign of overheating. Common causes are a torch rated too low for the job, a loose or wrong-size contact tip, and welding beyond the duty cycle. On water-cooled torches, low or dirty coolant, trapped air or poor flow can also be the cause.Stop and let the torch cool, then check the tip, the connections and the rating on the data plate. If the same torch keeps overheating, a higher-rated torch is usually the answer, rather than pushing it harder.