Kemppi MasterTig 400A DC Gen Power Source - 415v, 3ph MT425DCG

Double Pulse combines alternative pulse cycles to provide 30% faster welding speed and 20% less heat input. Helping to lower distortion and weld costs. Ideal for DC hand welding and offers a superb weld seam appearance.

MicroTack

MicroTack offers fast and accurate tacking with minimum heat input in both DC and AC TIG welding. Making it ideal for multiple, repetitive tacking on thin sheet applications, where consistency and appearance are vital. MicroTack can be set between 1 to 5 repeat pulse cycles or continuous cycle mode. The welding current level is set independently and the arc cycle time is selected between 1 to 200ms.

iTEC

iTEC is engineered ignition technology for reliable arc starts. Particularly useful with long torch extensions for site welding or precise thin materials and low current applications, you can set the variable spark force energy.

Auto Pulse

Easy and convenient, the only value to adjust is the welding current itself. Auto Pulse is ideal for DC current applications.

7" TFT Control Panel

Protected by a 3mm armour shield plate, the 7" TFT control panel is both impact and scratch resistant, allows fast and accurate parameter setting with WeldAssist, and offers 99 memory channels per process to save the best parameters or WPS values.