0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask when choosing options such as coolers, feeders, cables and trolleys for a high-current MIG power source.
Typical options are a separate wire feeder, interconnecting cables to link the feeder and the power source, a water cooler with a water-cooled torch for heavy work, remote or interface adapters for control, and an undercarriage or trolley for the machine and gas cylinder.Not every option suits every machine, because connectors, cooling methods and feeder types differ. Check the machine's handbook and rating plate for the options it supports before ordering, and ask our team if you are unsure which ones work together.
A water-cooled torch carries high current for long periods with less heat building up in the handle, so it suits heavy, continuous welding. Air-cooled torches are often rated lower for continuous use, and a torch's rating depends on the gas and the duty cycle, so always compare the torch's rating for your own gas and duty cycle.If your work is mostly short runs below the torch's air-cooled rating, a water cooler may not be needed. If you do run a water-cooled torch, it must have a working cooler connected. Check the torch and power source data before you decide.
A cable between the power source and a separate wire feeder usually carries the welding current, a control signal and the shielding gas, and on water-cooled versions the coolant hoses as well. A loose welding connection can overheat, so tighten each connector fully as the handbook says.Maximum length depends on the maker, the process and the cable size, because long runs cause voltage loss. Do not join cables together unless the handbook allows it. Use the length the maker specifies for your machine.
The water-cooled version includes coolant hoses so that the cooler can supply the torch through the feeder, while the air-cooled one does not. The two are not normally interchangeable, because the connections and the cable construction are different.Choose the version that matches how your torch is cooled. Check that it also suits your power source and feeder, because connectors and control wiring differ between machines. The handbook for your power source lists the matching cable types.
