0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
4 1/4" x 3 1/4" Anti Spatter Lens
Practical answers on choosing, fitting and looking after the taller-format shaded, cover and backing lenses used in many fixed-shade helmets.
No. The shade you need is decided by the process and the welding current, not by the size of the lens window. Published shade charts list shade by process, current and, for gas work, plate thickness.A taller lens simply gives you a larger view of the work. Use a recognised shade chart for your process, start with a shade that is dark enough, and step lighter only within the recommended range. Check the helmet maker's instructions and your risk assessment.
Yes. Arc radiation can reach anyone nearby. People near an arc should not be exposed without adequate protection, using screens or personal eye protection, and helpers working near an arc need anti-flash glasses. Shade requirements also apply to observers such as a fire watch or an assistant.A helmet lens protects only the person wearing it. Use screens, or give helpers suitable eye protection, and cover this in your risk assessment.
Not automatically. The shade should be chosen for the process and the cutting current, and plasma cutting is listed separately from arc welding in shade tables. Published plasma cutting values apply where the arc is clearly seen, and lighter filters may be used when the arc is hidden by the workpiece.Because the figures differ between sources, use the shade guidance in the plasma equipment's instructions as your starting point. Do not drop below the minimum for your current, and check with the helmet and lens maker.
Remove the old lens and measure its overall width and height, or read the size from the helmet manual or old lens packaging. Sizes are given in inches as well as millimetres, so a figure may differ slightly between listings of the same format.Also compare thickness and corner shape, and make sure the lens sits flat with the clip or gasket holding it. Cover, filter and backing lenses of the same size are different parts, so check you order the layer you need. If unsure, use the helmet's parts list.