0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
For MinarcTig, MasterTig MLS, MasterTig MLS AC/DC.
Practical answers on running, caring for and choosing parts for water-cooled TIG torches and their cable sets.
A water-cooled torch needs a separate cooler (a pump, tank and radiator) that circulates coolant through the torch head and back along the power cable. The cooler is normally connected to the welding machine, so check that yours is designed for the torch and the machine.Some coolers include flow detection intended to stop the torch overheating if flow is lost, but check whether yours has it and do not rely on it alone. Water cooling is usually chosen for higher-current or long-duty work, but always check the torch's rating and duty cycle on its data plate and in the manual.
Check the coolant level regularly, ideally each day the cooler is used. Keep the cooler clean and blow dust off the radiator fins with compressed air (with the power off), more often in dusty workshops.There is no single change interval for every coolant. Some low-conductivity coolants need changing more often than others, so follow the schedule in the cooler and coolant instructions. Discoloured, cloudy or slimy coolant is a sign it needs attention.
Switch on the cooler and machine and look over the hoses and fittings while the coolant is flowing under pressure. Check for drips at the torch head, handle and connectors, and make sure all fittings are tight and nothing is cracked, bulging or kinked.Also confirm the hoses are connected the right way round, so coolant reaches the torch head first. If you find a leak or the torch is running hot, stop and fix it before welding. Do not weld with a torch that is leaking or overheating.
An extra-flexible power cable is a softer, more flexible construction, usually with a silicone outer and braided cover. Makers describe it as lighter and easier to handle than a standard cable, which is less tiring on long jobs, and it stays more pliable in cold conditions. On a water-cooled torch the coolant returns along the power cable, so it is part of the cooling circuit as well as carrying the welding current.Whichever you choose, make sure it matches your torch type, length and machine connections, and check its rating on the data plate. A longer cable set gives more reach but is more to manage on the bench.
