0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Plain answers on cartridge-style plasma consumables: how to match the right one to your torch and job, and how to look after it.
Start with the system manual and the data plate on the torch or power source, which tell you which consumable family fits. Then match the part number on the old cartridge against the new one, and check the type suits the job: hand or machine torch, cutting or gouging, drag cutting or held standoff. Some designs use colour coding to separate these jobs, but the coding differs between makers.Wrong parts are a common mistake because many consumables look alike. The rating in the part name normally shows the current it is made for. If you are unsure, send the old part number and your system details to our team and we can help you check.
In a cartridge design, the parts that would otherwise be fitted one at a time, typically the shield, retaining cap, nozzle, electrode and swirl ring, are combined into one pre-aligned replaceable unit. Fitting takes seconds, and colour coding on some designs helps cut down mix-ups. Makers also claim longer life than separate parts, but treat that as a maker claim rather than a promise.The trade-off is that you replace the whole cartridge rather than only the part that has worn. What is inside a cartridge and how types are coded differs between designs, so use the manual for your system rather than assuming it matches another torch.
There is no single interval that suits every user, because life depends on the current, the thickness cut, the number of pierces and the air quality. Many operators change a cartridge when cut quality drops, before any warning from the machine. Signs include a change in the sound or colour of the arc, a slower cut, subtle changes in torch height, more dross, or a rough edge.Some systems also detect end of life and stop the arc. If your torch allows it, remove the cartridge and look at the nozzle opening: a notched or out-of-round orifice means it should be replaced, as does a damaged shield or cap. Follow the manual for your system.
Plasma consumables are made for a particular current or range, because the nozzle opening and gas flow are sized for that level of power. Running a nozzle at a current well above its rating can damage it and shorten its life, and cut quality suffers. Trade guidance often suggests setting the current close to, but not over, the rating of the nozzle.Match the cartridge to the current you will actually cut at and stay within the range the system manual allows. If you cut at several current levels you may need more than one type of cartridge. The rating shown in the part name, together with the manual, tells you what the part is made for.
