0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Contact tips, nozzles, diffusers and liners for a mid-size MIG torch: how to pick the right ones and keep them working.
Start with the torch itself. Check the data plate or label on the torch and the parts list in the manual, which show the consumables the torch is built for. If you still have an old part, compare it side by side: the thread type and size, the overall length and the shape need to match the tip holder or diffuser, and the wire size is normally marked on or listed for the tip.Do not rely on the name of a torch style alone, because different versions can use different thread sizes. If anything is unclear, our team can help you check a part against the details you have before you order.
Yes. The bore should suit the wire diameter you are running, as the tip's job is to pass welding current into the wire. A wrong-size tip is a common reason for short tip life. A bore that is too large can let the wire wander and arc inside the tip, and one that is too small can make the wire bind and feed badly.Tips for different wire diameters are usually marked or listed by wire size, so check the marking and the manual for your torch. Changing wire size normally means changing the tip, and often the liner and drive rolls too.
The diffuser sits at the front of the torch neck. The contact tip screws into it, and it spreads the shielding gas around the tip so that it forms an even shield over the weld pool. It also helps pass current to the tip.Clogged gas holes restrict the gas flow and can lead to spatter and porosity, so clean or replace the diffuser if they are blocked. Replace it too if the threads are damaged, if the tip will not seat firmly, or if it is worn or damaged by heat. Worn diffusers and seals can also spoil gas cover. Fit only the type specified for your torch.
Not necessarily. Too little shielding gas leaves the weld exposed to air and can cause porosity and spatter. But very high flow can also be a problem, because it can create turbulence that draws air into the shield and causes porosity of its own.Check the flow against the guidance for your wire and gas, then look for blocked nozzles or diffuser holes, damaged O-rings or hoses, and draughts. If the problem remains, ask your gas supplier or the maker for advice.
