0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Answers to the questions buyers ask when choosing, fitting and looking after replacement gas nozzles for MIG/MAG welding torches.
The nozzle has to be made for your torch series, because the fitting, diameter and length differ between torch sizes. Check the torch rating or marking and compare the old nozzle with the new one.Then choose the size for the job: higher current and larger wire generally call for a larger bore, while a joint with limited access may need a smaller or tapered nozzle. Check the torch maker's guidance, or ask our team if you are unsure which fits.
Replace the nozzle when it is damaged or distorted, or when spatter sticks to it and cannot be removed properly. Damaged or worn insulation and worn seals or retaining rings, which let the nozzle shift or fall out, are also reasons to replace it.Other signs are porosity in the weld or an unstable arc. If you are replacing nozzles very often, look for a cause such as a bore that is too small for the job or a contact tip sitting in the wrong position.
Clean it regularly with a purpose-made nozzle reamer of the right size, taking care not to scratch or distort the bore. Remove the nozzle first and let the torch cool completely. Check for spatter sticking inside and for blocked gas ports before and after use.Do not hammer the nozzle against the bench to knock spatter out, as this can damage it and the torch. Spatter that has restricted the gas path can cause porosity, so do not leave cleaning until the nozzle is clogged.
Yes, used sparingly they can help keep a nozzle cleaner and prolong its life, because spatter sticks less readily and is easier to remove.Use only products made for welding torches and follow the maker's instructions. Keep the spray off the insulating part of the nozzle, as some products can break down the insulating material. Do not let any product get into the gas path in a way that contaminates the weld.