SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
014.H394.1 Binzel Abimig AT 355 LW MIG Torch 4M (Without Neck)
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 014.H394.1  

    Binzel Abimig AT 355 LW MIG Torch 4M (Without Neck)
    014.H394.1

    £169.60  EX VAT
    SSP Suggested Selling Price = £199.46  YOU SAVE £29.86
     Buy in 3 easy interest free payments of £56.53† with
    Shop Parts

    The newly developed, super lightweight MIG/MAG welding torch series “ABIMIG® A T LW” with ergonomic and universal two-component handle offer flexibility in perfection. They are equipped standard with ball joint and lightweight “Bikox® LW” cable assembly as well as exchangeable and 360° rotatable torch neck, so the torches enable ergonomic and relaxed welding in every position.

    Rating: 340A CO2, 320A Mixed Gas
    Duty Cycle: 60%
    Wire size: 1mm - 1.6mm

    Related Items

    Abimig AT 355 LW FAQs

    Straight answers on choosing, fitting and looking after a larger lightweight air-cooled MIG torch and its short, long and flexible necks.

    How do I choose between short, standard, long and extra-long necks?icon-minus-redicon-plus-red

    Neck length is about reach. A short neck gives good control and keeps the torch handle close to the joint, a standard neck suits most general work, and long or extra-long necks reach into deep corners, inside boxes and over obstructions. The trade-off is that a longer neck is a little harder to hold steady.

    Pick the shortest neck that gives you clear access to the joint. Whichever length you choose, it must be the correct style and size class for your torch, because necks from different styles do not generally interchange.

    When is a flexible neck better than a fixed swan neck?icon-minus-redicon-plus-red

    A flexible neck can be bent to suit each joint, which is useful when you weld in many different positions or in confined spaces and do not want to change necks. A fixed swan neck holds its angle exactly, which suits repeat work where the same torch angle is wanted every time.

    A flexible neck should be bent gently and not forced into tight, repeated kinks, as this can wear it out or damage the parts inside. Always follow the maker's instructions for how far the neck can be bent.

    What does the size number tell me about the current rating, and does the gas matter?icon-minus-redicon-plus-red

    The size number is a class that gives a rough idea of the current the torch can carry. The actual rating depends on the shielding gas, because torches are usually rated higher on carbon dioxide than on mixed gas, and on the duty cycle, which is the share of each ten-minute period you can weld without letting the torch cool.

    Pulsed welding can reduce the usable rating. Read the rating for your gas and duty cycle on the maker's data sheet and avoid working right at the limit for long periods.

    Which cable length should I choose?icon-minus-redicon-plus-red

    Choose the shortest length that lets you reach the work from the wire feeder without pulling on the machine. An overly long cable tends to tangle and puts extra strain on the liner, while a cable that is too short pulls on the power source and stresses the connections.

    Plan where the machine will sit and how far you need to move. In use, keep the cable as straight as practical and clear of vehicles, moving equipment and sharp edges.

    See all 6 questions for this category

    Shop Similar Categories